1200Mbps Ceiling-Mounted High Power Openwrt Support 802.11ac Wireless Access Point
XD3200 Ceiling Wireless Access Points is specifically designed to operate in set-ups for both Residential and commercial applications. Designed with Atheros Chipset and 1W RF power to assure full WiFi coverage, whether in old buildings or modern structures. Comply with the next generation 802.11ac Wi-Fi standard, working on 2.4GHz (300M) and 5GHz(900M) simultaneously, wireless speed up to 1200 Mbps, together with Gigabit Ethernet port, enabling users to enjoy high speed surfing, but also allows for very stable connectivity of control systems and the possibility of bridging and providing access simultaneously.
The very stable operating devices minimize the occurrence of auto resets and prevent faulty start-ups after resetting. The flexible and simple web interface facilitates a fast, time saving configuration process for the installer.
Designed with the End-user in mind
The AP is designed with the end-user in mind. The very inconspicuous exterior makes sure it can be installed in most residential and commercial spaces.
Power over Ethernet
The XD3200 can be powered fully with PoE (Power over Ethernet), avoiding the need for power cabling throughout the building.
The managed Access Points can be configured in up to 8 separate SSID’s, each SSID support tag VLAN to allow for simulating different wireless networks like a guest network. These networks can be configured to give different users, different rights that are specific to each user and their individual needs (e.g. access the network or dedicated parts of the network, access internet or just intranet, use VoIP, stream video, etc.).
The XD3200 offers multiple security modes, which makes your data transmission safer. The Unified Management System based on X86 allows network administrators to centrally manage IP Address, SSID, Security Settings, firmware upgrading etc for all the LAN APs. What’s more, this wireless access point work with Cloud Management System, easy to do remote management, advertisement and captive portal authentication, which make this AP more professional in WiFi Projects.
Applications
This high power, dual radio and high speed wireless access point can be deployed in a wide array of situations for both residential and commercial applications.
Residential Applications:
Up to 50 meters wifi range, 1PC XD3200 is full wifi range for residential work in Gateway operation mode, saved wireless router, wifi repeater, to provide cost effective connectivity.
Commercial Applications:
Up to 6 hotel room wifi range, or 100+ end users, XD3200 public applicated in hotel, school, shopping mall. Work with AC controller, easy to do central managment and data configuration, together with advertisement and portal authnetication.
SPECIFICATION
| Wireless | |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Speed | 900Mbps compatible with 5.8GHz 300Mbps b/g/n for 2.4GHz |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK |
| Channel | Ch.1-13 for 2.4GHz Ch.36-165 for 5.8GHz |
| Frequency band | 2.412Ghz-2.472 for 2.4GHz 5.180Ghz-5.825Ghz for 5.8GHz |
| Hareware | |
| Chipset | Atheros QCA9563 + QCA9882 +QCA8334 |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port 1 * 10/100 / 1000Mbps RJ45 LAN Port 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | Build in 5dBi MIMO Antenna |
| Power consumption | 30W(Full Load) |
| Software | |
| Standard Version | Bandwidth: 20Mhz, 20/40Mhz, 80Mhz |
| Operation Mode | Gateway, Wireless AP, Repeater, WISP |
| SSID No | 4 SSID for 2.4G, 4SSID for 5.8G |
| Factory Default Setting | Yes |
| Centralized Management by software | Yes |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
| Protocols | IPv4 |
Product Tags:
|
|
High Power AC1200 Dual-Band Ceiling Mounted Wireless Access Point with CPU QCA9563 Model XD3200 Images
|
